Roland S-0816, S-1608 Connection to S-4000S/S-4000H

8—Applications
66 S-1608/S-0816 Digital Snake Owner’s Manual
][
It’s possible to use the S-1608/S-0816 with S-4000S or S-4000H in the following configuration.
Connection to S-4000S/S-4000H
The S-4000S input/output module (SI-AD4, SI-AES4/SO-DA4, SO-AES4) is set up as shown below. You
should not attach nor remove the module. Be sure to consult with the nearest Roland Service Center.
Please visit www.rolandsystemsgroup.net for the latest information about the S-1608/S-0816 System.
SI SI
EmptyEmptyEmpty Empty Empty
EmptyEmptyEmpty Empty Empty
SISI SI SI
SO SO SO SO
SO SO
= SI-AD4/SI-AES4
= SO-DA4/SO-AES4
SI
SO
S-0816 8x16
S-1608 16x8
S-4000S
S-4000S
S-4000H
S-1608 16x8
REAC cable SC-W100S
or Cat5e cable
REAC cable SC-W100S
or Cat5e cable
REAC cable SC-W100S
or Cat5e cable * Be sure to set the REAC mode of the S-4000H
to S (SLAVE).
* OUTPUT 17–24 and 25–32 on the S-4000H do
not output anything.
* Be sure to set the REAC mode of
the S-1608 to M (MASTER).
* OUTPUT 1–8 on the S-1608 do
not output anything.
S-1608_e.book 66 ページ ２００７年４月２３日 月曜日 午後１２時５７分