45
Advanced Operation
In addition to editing its settings via the panel knobs and sliders, the GAIA SH-01 also allows you to edit the following
parameters.

Patch Parameters

COMMON

Parameter Range Explanation Panel operation
LFO KEY TRIGGER OFF, ON
If this is on, the LFO cycle will be restarted when you
press a key.
The MODULATION LFO cannot be controlled with
this setting.
Hold down the [CANCEL/SHIFT] button and press the [TEMPO
SYNC] button.
Button lit: ON
Button unlit: OFF
FILTER ENVELOPE
VELOCITY SENS 0–+63
Species how the cuto frequency will be aected
by keyboard dynamics.
This eect can be obtained only when KEYBOARD
VELOCITY (p. 51) is set to “REAL.”
Hold down the [CANCEL/SHIFT] button and turn the [CUTOFF]
knob.
LEVEL VELOCITY SENS 0–+63
Species how the volume will be aected by
keyboard dynamics.
This eect can be obtained only when KEYBOARD
VELOCITY (p. 51) is set to “REAL.”
Hold down the [CANCEL/SHIFT] button and turn the [LEVEL]
knob.
PITCH BEND RANGE
DOWN 0–24
Species the amount of pitch change that will occur
when the pitch bend/modulation lever is moved all
the way to the left.
1. Hold down the [SHIFT] button and move the pitch bend/
modulation lever all the way to the left or right.
2. Hold down the OCTAVE [DOWN/-] button and press a key
(C2–C4).
3. Press the [CANCEL/SHIFT] button.
PITCH BEND RANGE UP 0–24
Species the amount of pitch change that will occur
when the pitch bend/modulation lever is moved all
the way to the right.
1. Hold down the [SHIFT] button and move the pitch bend/
modulation lever all the way to the left or right.
2. Hold down the OCTAVE [UP/+] button and press a key
(C2–C4).
3. Press the [CANCEL/SHIFT] button.
PORTAMENTO TIME 0–127 Species the time over which the pitch will change
to the next note.
While holding down the [PORTAMENTO] button, press the
OCTAVE [UP/+] or OCTAVE [DOWN/-] button.
Hold down the [PORTAMENTO] button and press one of the
NUMBER [1]–NUMBER [8] buttons.
Hold down the [PORTAMENTO] button and move the LFO
[FADE TIME] slider.
1. Hold down the [CANCEL/SHIFT] button and press the
[PORTAMENTO] button.
2. Use any of the following three methods to set the
portamento time.
• Press one of the NUMBER [1]–NUMBER [8] buttons.
• Turn the EFFECTS [CONTROL 1] knob.
• Move the LFO [FADE TIME] slider
3. Press the [CANCEL/SHIFT] button.
ARPEGGIO VARIATION A1–H8 Species how the arpeggio will be sounded.
Hold down [ARPEGGIO] button, and use the [BANK] button and
NUMBER [1]–NUMBER [8] button to select a bank and variation.
1. Hold down [CANCEL/SHIFT] button, and press the
[ARPEGGIO] button.
2. Use the [BANK] button and NUMBER [1]–NUMBER [8]
button to select the bank and variation.
3. Press the [CANCEL/SHIFT] button.
PAN -63–+63 Set the panning of the tone. “-63” is far left, “0” is
center, and “+63” is far right.
Hold down the [CANCEL/SHIFT] button and turn the OSC
[DETUNE] knob.
PAN LFO DEPTH 0–127 Species the depth to which LFO will aect the pan. Hold down the [CANCEL/SHIFT] button and move the LFO
[AMP DEPTH] slider.