23
Chapter 1: Getting Started
1-3 Assembling and Installing
Step 2: Install the Included Items
1
Attach the stays onto the back of the machine at the locations shown in the figure.
2
Place the media guide on the stays and secure it in place using the included small bolts.
3
Pass the media flanges onto the retainers and secure in place with the flange retaining pins.
Media guide
Front
Short
Long
Rear
Bolts (Small)
Right-hand side of
the back of the unit
Left-hand side of
the back of the unit
Flange retaining
pins
2)
Media flanges
1)
Stay (Right)
Stay (Left)
Left-hand side of
the back of the unit
Right-hand side of
the back of the unit
Orientation of the media guide
Media guide
Retainer
Line up the ridges
and grooves.
Orient the media flange so
that it's lined up with the core
diameter of the loaded roll
media.
2 in. 3 in.
Bolts
(small)