Creating a Drum Kit
24
7. Press the [F3] (PASTE) button.
If you’re pasting a pad, the paste operation will occur at
this point.
If you’re pasting a drum kit, a conrmation screen will
appear.
* If you decide to cancel, press [F1] (CANCEL).
8. Press the [F3] (OK) button.
The contents of the clipboard will be overwritten onto
the paste-destination.
9. Press the [EXIT ] button several times to return to
the DRUM KIT screen.
Saving a Drum Kit to a USB Flash Drive
Here’s how you can save a drum kit to your USB ash
drive.

Saving a Drum Kit

1. Connect your USB ash drive (p. 9).
2. Make sure that the drum kit you want to save is
selected.
3. In the DRUM KIT screen (p. 11), press the [MENU]
button.
The KIT MENU screen will appear.
4. Press the cursor buttons ( / ) or the [MENU]
button to scroll the screen, and press the [F3]
(SAVE/LOAD) button.
The 1 KIT SAVE/LOAD screen will appear.
5. Press the [F1] (SAVE) button.
The 1 KIT SAVE screen will appear.
6. Use the cursor buttons ( / ) or the value dial to
specify the save-destination.
7. Press the [F3] (SAVE) button.
* If data already exists at the save-destination, a
conrmation screen will appear.
Press the [F3] (OK) button to execute the save
operation. If you decide to cancel, press the [F1]
(CANCEL) button.
The drum kit you selected in step 2 will be saved to your
USB ash drive.
When the data has been saved, the screen will indicate
“Completed” and return to the DRUM KIT screen.