Settings for the Entire TD (SYSTEM)
38
Using USB Flash Drive(USB Memory)
1. First connect your USB ash drive to the TD (p. 9).
2. In step 4 of the basic procedure (p. 34), choose
“USB Memory” and then press the [F3] (ENTER)
button to access the USB MEMORY screen.
3. Use the cursor buttons ( / ) to select the
desired menu item.
You can choose from the following menu items.
Menu Description Page
Save Backup Save data to the USB ash drive. p. 38
Load Backup Load data from the USB ash
drive into the TD. p. 39
Delete Data Delete data from the USB ash
drive. p. 39
Information View information about the USB
ash drive. p. 40
Format Format the USB ash drive. p. 40

Saving Data to a USB Flash Drive

(Save Backup)

Here’s how to save TD data to a USB ash drive.

Data that will be saved

• All drum kits
• System settings
1. Choose “Save Backup“ and press the [F3] (ENTER)
button (p. 38).
2. Use the value dial to select the save- destination
number.
Next you can assign a name to the data that will be
saved.
If you don’t need to assign a name, proceed to step 7.
3. Press the [F2] (NAME) button.
The SAVE screen will appear.
You can assign a name of up to eight characters.
4. Press the [F1] ( ) or [F2] ( ) button to move the
cursor to the character that you want to change.
5. Use the value dial to change the character.
Here you can hold down the [F3] (DEL/INS) button and
use the [F1][F2]buttons to delete or insert a character.
Button Description
[F3]+[F1] (DEL)
Deletes the character at the cursor
location, and moves the subsequent
characters one place to the left.
[F3]+[F2] (INS)
Inserts a space at the cursor location
and moves the subsequent characters
one place to the right.
6. When you’ve assigned a name, press the [EXIT]
button to return to the previous screen.
7. Press the [F3] (SAVE) button.
* If you select a number in which data has already
been saved, and then press the [F3] (SAVE) button,
a conrmation message will appear, asking you
whether you really want to overwrite the data.
If you decide to cancel, press the [F1] (CANCEL)
button and then reselect the save-destination
number.
If it is OK to overwrite the existing data, press the [F3]
(OK) button.
When the data has been saved, the screen will indicate
“Completed.”