Practicing in Coach Mode

32
Parameter Value Description
Display 1
Display 2
In the screen, select the pad for which a timing graph
will be shown.
Gauge
LEFT
BEHIND
The left side of the timing graph is
shown as BEHIND (late).
LEFT
AHEAD
The left side of the timing graph is
shown as AHEAD (early).
* You can press the [F2] (METRO) button to make
metronome settings (p. 13).
Developing Internal Timing Sense (QUIET COUNT)
This mode will help you develop a good sense of time/
tempo.
For the rst few measures, the metronome will sound at
the specied volume; over the next few measures, the
volume will diminish until it is nearly inaudible. This cycle
of several measures will continue until you stop it.

Start practicing

In the COACH MENU screen, press the [F2] (QUIET
COUNT) button; practice will start immediately.
1. Strike the pads in time with the metronome.
• The metronome will sound during the rst few
measures. When you reach the last measure during
which the metronome will sound, the screen will
indicate “Ready.”
• When the metronome stops sounding, the screen
indication will change to “Quiet.” Continue striking
the pads during this time.
• After the Quiet region, the proportion of your strikes
that were played at an accurate tempo are shown as
a “%” value.
Settings
In the QUIET COUNT screen, press the [F2] (SETUP)
button to access the settings screen.
Parameter Value Description
Measures 2, 4, 8, 16
(Measures)
Specify the length (measures) of the
interval for which the metronome will
alternate between “Sounding” and
“Quiet.”
Quiet
Of the measures specied by “Measures,” this setting
species the length of the measures that will be “Quiet.”
RANDOM The length of the Quiet interval will
randomly change each time.
1, 2, 4
Species the length (number of
measures) of the Quiet interval.
* This setting cannot be longer than half
of the Measures value.
* You can press the [F2] (METRO) button to make
metronome settings (p. 13).
WARM UPS
In this mode you’ll successively practice steps 1–3, be
graded on your performance at each step, and then
receive a nal evaluation.
You can choose one of three courses, ranging from easy
to dicult. You can also adjust the tempo according to
your level of skill.
MEMO
After you’ve started WARM UPS, you can press the
[F3] (PAUSE) button to pause the WARM UPS.
To resume practicing, press the [F3] (START) button
once again.
If you’re nished with WARM UPS, press the [F1]
(STOP) button.