![](/images/backgrounds/246261/bge.png)
12
PlayingAfter turning the power on, you can play the demo patterns.
Here’s how you can listen to the sounds by switching drum kits
while playing the demo patterns.
fig.P-Demo.eps
* All rights reserved. Unauthorized use of this material for
purposes other than private, personal enjoyment is a
violation of applicable laws.
* No data for the demo patterns that is played will be output
from MIDI OUT.
1. Press the [ ] (Play/Stop) button.The demo patterns will play.2. Press the DRUM KIT [<] [>] buttons to select drum kit.3. To stop demo pattern playback, press the [ ] button once again.When you press the [ ] (Rec) button to start recording
your performance (p. 17), the demo patterns will temporarily
be erased. The next time you turn on the power, you will
again be able to play the demo patterns.
A drum kit is a combination of the sounds & settings for each pad
and pedal, as well as ambience.
fig.P-DrumKit.eps
1. Press the DRUM KIT [<] [>] buttons to select drum kit.fig.d-KitScreen.eps
This is the TD-4’s basic screen.
fig.d-KitNo1.eps
Regardless of the screen that is displayed, pressing the DRUM
KIT [<] [>] buttons will access the “DRUM KIT” screen (except
during recording/playback).
Hearing What the Kits Sound Like
2 1, 3
Selecting a Drum Kit
1
About the “DRUM KIT” screen
ADrum kit number
BDrum kit name
CThis shows the metronome tempo (p. 17).
DStrength of the pad strike displayed in 6 levels.
E
This is shown if the cross-stick technique can be
used with the snare (p. 29).
(When Xstick Volume is anything other than OFF)
A
B
D
C
E
TD-4_e.book 12 ページ 2008年11月5日 水曜日 午後6時40分