33
Overview Basic Operation Adv. 1 (Kit) Adv. 2 (Phrase) Adv. 3 (Other) Appendix
HH CTRL setting examples

If a hi-hat control pedal is connected

Choose “PEDAL” for the pad that’s assigned to the hi-hat Inst.
Set to “PEDAL”

If a hi-hat control pedal is not connected

Make the following settings if you want to assign the closed hi-hat and open hi-hat sounds to two dierent pads.
Set Inst A to “CLOSE”
Set Inst A to “OPEN”
If you want to use one pad to play both the closed hi-hat , and be able to switch to the open hi-hat, choose the same hi-hat Inst for both
Inst A and B of a single pad, set “Inst Layer Type” (p. 30) to “SWITCH,” and set HH CTRL as follows. Use the “Layer Point” (p. 30) setting to specify
the dynamic level at which the hi-hat will open.
Set Inst A to “CLOSE”
Set Inst B to “OPEN”
Volume
Playing
Dynamics
INST Screen QUICK MENU

From the INST screen, press the [QUICK] button to access the following QUICK MENU.

Menu Explanation Page
Copy Pad Copy pad settings. p. 35
Paste Pad Paste pad settings. p. 35
Pad Exchange Access the Pad Exchange screen where you can exchange pads. p. 36
Multi Edit Access the MULTI EDIT screen where you can edit the tuning and volume of each pad. p. 24
Kit Protect ON/OFF Switch the kit protect setting on/o. p. 34