68
Specications

SPD-30: OCTAPAD

Message Meaning Action

MIDI-related error messages
MIDI Oine.
The MIDI cable or USB cable was disconnected. Alternatively,
communication with the external MIDI device has been interrupted for
some reason.
Check whether the MIDI cable or USB cable could have been disconnected or
broken.
MIDI Buer Full. A large amount of MIDI messages was received in a short time, and the
OCTAPAD was unable to process them all.
Make sure that the external MIDI device is correctly connected. If this does not
solve the problem, decrease the amount of MIDI messages being transmitted to
the OCTAPAD.
Transmit buer full. An excessive amount of data was transmitted from the OCTAPAD, and
could not be correctly output from MIDI OUT connector.
Decrease the amount of data being transmitted, for example by decreasing the
recorded Phrase Loop data.
USB-related error messages
Can not access to the USB memory. USB memory is not connected. Connect USB memory to the USB memory connector.
Could not read this le. The specied data was not found in the USB memory. Alternatively, the
saved data is damaged. Check the USB memory.
USB Memory Full. There is insucient free space on the USB memory. Delete unneeded data.
Check USB memory. The USB memory is not working correctly. Check the USB memory.
Remove the USB device.
A USB device that the OCTAPAD cannot handle is connected, or a foreign
object may have entered the USB memory connector, causing a short
circuit.
Immediately disconnect the connection, and check that no foreign object has
entered the USB memory connector.
PHRASE LOOP-related error messages
Phrase Memory full. The Phrase Loop memory area is full. Save your data to USB memory (p. 49), and create a new phrase.
System-related error messages
Device error. There is a problem with the internal system. Please contact your dealer.
Data memory was damaged. There is a problem with internal memory. A factory reset will be executed automatically.
Error Message List

Pads

Built-in Pads: 8
* Four external trigger inputs are provided, allowing you
to connect Pads.
Kits 50
Kit Chain 8 chains (20 steps per chain)

Instrument Parameters

Tuning
Muing
Soft Attack
Tone Color
Pitch Sweep
Volume
Pan
Reverse

Eect Types

Ambience (7 Types)
Equalizer
Limiter
Multi Eect (30 Types)

Phrase Loop

Phrases: 50
Parts: 3
Tempo: 40–260
Resolution: 480 ticks per quarter note
Recording Method: Real-time
Maximum Note Storage: approx. 10,000 Notes
Display 160 x 160 dots Graphic Type LCD (Backlit LCD)
Pad Status Illumination x 8 (LED)

Connectors

PHONES Jack (Stereo 1/4 inch phone type)
OUTPUT Jacks (L (MONO), R) (1/4 inch phone type)
MIX IN Jack (Stereo 1/4 inch phone type)
EXTERNAL TRIGGER INPUT Jacks x 4
HH CTRL Jack
FOOT SW Jack (1/4 inch TRS phone type)
MIDI Connectors (IN, OUT)
USB MEMORY Connector (for USB Memory)
USB MIDI Connector (for USB MIDI)
Output Impedance 1.0 k ohms
Power Supply AC Adaptor (DC 9 V)
Current Draw 600 mA
Dimensions 540.8 (W) x 272.4 (D) x 87.6 (H) mm
21-5/16 (W) x 10-3/4 (D) x 3-1/2 (H) inches
Weight 3.8 kg / 8 lbs 7 oz (excluding AC Adaptor)

Accessories

Owner’s Manual
AC Adaptor (PSB-1U)
Screws (M5 x 12 mm) x 4

Options

Pads (PD series, PDX series)
Cymbals (CY series)
Kick Triggers (KD series)
Hi-Hats (VH-11)
Hi-Hat Control Pedal (FD series)
Pad Stand (PDS-10)
All-Purpose Clamp (APC-33)
Acoustic Drum Trigger (RT-10K, RT-10S, RT-10T)
Pedal Switch (DP-2)
Foot Switch (FS-5U, FS-6)
Personal Drum Monitor: PM-10, PM-30
V-Drums Accessory Package: DAP-3
V-Drums Mat: TDM-10
USB memory
* Use USB memory sold by Roland. We cannot guarantee
operation if other products are used.
* In the interest of product improvement, the specications and/or appearance of this unit are
subject to change without prior notice.