34
Basic Operation of the V-Synth GT
To edit a value, you can use the VALUE dial, [INC/+] [DEC/-], or drag on the touch screen.
• In each V-Synth GT screen, you can select a value using the cursor as described earlier, and modify its value.
• Each parameter has its own range of possible values. You cannot set any value smaller than the minimum
value or greater than the maximum value.

VALUE Dial

Turning the VALUE dial clockwise increases the value,
and turning it counterclockwise decreases its value. Hold
down [SHIFT] as you move the VALUE dial to increase
value increments to make large value changes more
quickly.
fig.03-04.eps

[INC/+] and [DEC/-]

Press [INC/+] to increase the selected value, and [DEC/
-] to decrease it. Keep the button pressed for continuous
adjustment. For faster value increases, keep [INC/+]
pressed down and press [DEC/-]. To decrease values
quickly, keep [DEC/-] pressed down and press [INC/+].
fig.03-05.eps

Touch Screen

Touch a parameter value, and drag your finger up/down
or left/right. Dragging upward or to the right increases
the value, and dragging downward or to the left
decreases the value.
fig.03-06.eps

Numeric Keys

You can select a patch by using the numeric keys. Enter
a number and press [ENTER] to finalize your choice.
In addition to selecting patches, the numeric keys can
also be used for numeric input such as selecting tones,
effects, or waveforms.
Here’s how to enter a numeric value in a value box.
• [0]–[9] buttons: Enter numerals.
• [ENTER] button: Finalizes the value you entered.
• [EXIT] button: Cancels the value you entered.
For some parameters, it may not be possible to enter a
value correctly using the numeric keys.
Editing a Value
V-Synth-GT_e.book 34 ページ ２００７年４月９日　月曜日　午後１時４６分