36
Panel Descriptions
■ Turning the Effects On and Off
With the FS-5L connected, you can check the indicator
on the FS-5L to see whether the effect is on or off.
The indicator is lit when the effect is on; the light goes
out when the effect is turned off.
* The VGA-7’s panel controls cannot be used to turn the effects
on and off while the FS-5L is connected.
EFX Jack (EFX)
Separately sold foot switches (e.g., BOSS FS-5U or FS-5L) can
be connected here to turn effects on/off.
Delay Jack (DELAY)
By using a separately available connection cable (Roland
PCS-31) to connect two foot switches, you can use the foot
switches in the following ways.
fig.42
TIP (white): DELAY
The delay effect will be turned on/off.
RING (red): TAP/HOLD
Use for tap-input of the delay time. If the delay type is set to
HOLD, this will function as the switch to start/stop
recording.
Connect a momentary-type foot switch (BOSS FS-5U: sold
separately).
* If only one foot switch is connected, it will turn delay on/off.
Chorus Jack (CHORUS)
You can connect a separately available foot switch (BOSS FS-
5U or FS-5L) to turn chorus on/off.
Reverb Jack (REVERB)
You can connect a separately available foot switch (BOSS FS-
5U or FS-5L) to turn reverb on/off.
■
Switching Manual/Memory and PatchesWhen the Foot Switch Type (p. 39) in the System settings
is set to “3 PROGRAM,” Manual and Memory are
switched with a foot switch connected to the EFX jack,
while you can switch Patches when the foot switch is
connected to the DELAY, CHORUS, or REVERB jack.
Connect a momentary-type foot switch (BOSS FS-5U: sold
separately).
fig.104
EFX Jack
Switches between Manual mode and the currently selected
Patch (Memory).
DELAY Jack
* Connect two foot switches using the optional connection cord
(Roland PCS-31).
TIP (white)
Each time the foot switch is pressed, the Patch bank number
rises to the next highest in the series of numbers.
RING (red)
Each time the foot switch is pressed, the Patch bank number
decreases to the next lowest in the series of numbers.
CHORUS Jack
The Patch number decreases in sequence each time the foot
switch is pressed.
REVERB Jack
The Patch number increases in sequence each time the foot
switch is pressed.
Connection cable:
PCS-31 (sold separately)
RING (Red) TIP (White)
Tap Tempo
(Hold)
Delay
On/Off
Switching banksSwitching numbers Switching
Manual/Memory
RING
(Red)
TIP
(White)