Frame counter
Replaying images
Before shooting |
Record mode
A frame counter is displayed in the right upper corner of the display when the camera is in a shooting mode. The upper number shows the total shot number and the lower number indicates the remaining number of frames, which is subtracted each time when the shutter is released.
Right button (forward)
Left button 
(reverse)
Press Mode shift button to set the camera to Playback mode and the last picture taken appears on the monitor. Press Right button to advance pictures and Left button to reverse them.
After shooting | Maximum frame |
| |
| number allowing |
| predicted capturing |
*Since the function of the lower counter is calculated based on images with relatively low data compression ratios, depending upon photographic conditions, there may be a case that the number is not subtracted.
Setting resolution
Playback |
image number |
Shot number |
Playback mode
When the camera is in Playback mode, two numbers appear at upper right corner of the monitor. The upper one indicates the frame number of the image being played on the monitor. The lower one indicates total number of pictures taken.
Image |
resolution |
Remember to select the resolution setting each time you turn on the camera. The setting auto starts at "N" Normal resolution. With camera turned on in Record mode, press Right button to select image resolution which will appear upper left corner of the monitor in letters H, N and L.The letters stand for:
H = High resolution at 2304 x 2304 pixels (interpolated)
N = Normal resolution at 1536 x 1536 pixels
L = Low resolution at 768 x 768 pixels
40
41
