Chapter 4: Understanding the User Interface

 

You can also enter ROM monitor mode by entering the reload

 

EXEC command and then pressing <Break> during the first 60 sec-

 

onds of system startup. To save changes to the configuration file, us

 

the copy running-config startup-config command be-

 

fore issuing the reload command.

:

 

 

 

> ?

 

$ state

Toggle cache state (? for help)

B [filename] [TFTP Server IP address TFTP Server Name]

Load and execute system image from ROM or from TFTP server

C [address]

Continue execution [optional address]

D /S M L V

Deposit value V of size S into location L with modifier

E /S M L

Examine location L with size S with modifier M

G [address]

Begin execution

H

Help for commands

I

Initialize

K

Stack trace

L [filename] [TFTP Server IP address TFTP Server Name]

Load system image from ROM or from TFTP server, but do not begin execution

O

Show configuration register option settings

P

Set the break point

S

Single step next instruction

T function

Test device (? for help)

Deposit and Examine sizes may be B (byte), L (long) or S (short). Modifiers may be R (register) or S (byte swap).

Register names are: D0-D7, A0-A6, SS, US, SR, and PC

To return to user EXEC mode, type continue. To initialize the router or access server, enter th i command. Th i command causes the bootstrap program to reinitialize the hardware, clear the contents of memory, and boot the system. (Use the i command before you run any tests or boot the software.) To boot the system image file, use the

bcommand.

August 1997

Page 4-9

2524UM

 

Page 45
Image 45
AIS AI2524 You can also enter ROM monitor mode by entering the reload, Copy running-config startup-config command be