AI2524 Router Card User’s Manual

2.Specify the subinterface IP address, if needed. ip address ip-address mask

3.Assign a map group to the subinterface.

map-group group-name

Example: SVCs on a Subinterface

This example configures a point-to-point interface for SVC operation. This example assumes that the main serial 0 interface has been config- ured for signalling, and that SVC operation has been enabled on th main interface.

int s 0.1 point-point

Define the map-group; details are specified under the map-list holiday command:

map-group holiday

Associate the map-group with a specific source and destination:

map-list holiday local-addr X121 <X121-addr> dest-addr E164 <E164-addr>

Specify destination protocol addresses for a map-class:

ip 131.108.177.100 class hawaii IETF appletalk 1000.2 class rainbow IETF broadcast

Define a map class and its QOS settings:

map-class hawaii frame-relay cir in 2000000 frame-relay cir out 56000 frame-relay be 9000

Page 13-10

August 1997

 

2524UM

Page 326
Image 326
AIS AI2524 Example SVCs on a Subinterface, Map-group group-name, Specify destination protocol addresses for a map-class