AIS AI2524 Examples NETs Configuration, These are examples of configuring NETs for both ISO Igrp

AI2524 Router Card User’s Manual

You must statically assign the multiple area addresses on the router. You can assign up to three area addresses on the AI2524. The number of areas allowed in a doma inis unlimited.

All the addresses must have the same system ID. For example, you can assign one address (area1 plus system ID), and two additional ad- dresses in different areas (area2 plus system ID and area3 plus system ID) where the system ID is the same.

A router can dynamically learn about any adjacent router. As part o this process, the routers inform each other of their area addresses. If two routers share at least one area address, the set of area addresses of the two routers are merged. The merged set cannot contain more than three addresses. If there are more than three, the three addresses with the lowest numerical values are kept, and all others are dropped.

Beginning in global configuration mode, configure multiple area ad dresses in IS-IS areas:

1.Enable IS-IS routing and enter router configuration mode. router isis [ tag]

2.Configure NETs for the routing process. The router can have up to three NETs. Enter each command separately.

Examples: NETs Configuration

These are examples of configuring NETs for both ISO IGRP and

IS-IS.

ISO IGRP

This example illustrates specifying a NET:

router iso-igrp Finance

net 47.0004.004d.0001.0000.0c11.1111.00

This example illustrates using a name for a NET:

clns host NAME 39.0001.0000.0c00.1111.00 router iso-igrp Marketing

net NAME

Page 9-24	August 1997
	2524UM