AIS AI2524 Configure the Cisco IOS software from Memory, Host network, Ip-address, Filename

AI2524 Router Card User’s Manual

sence of critical configuration information. Refer to Use Setup for Configuration Changes, for details on the setup command facility.

Configure the Cisco IOS software from Memory

To configure the software to execute the commands located in NVRAM or to execute the configuration specified by the CONFIG_FILE environment variable, type this command in privi- leged EXEC mode:

configure memory

Configure the Cisco IOS software from the Network

You can configure the software by retrieving and modifying a config- uration file stored on one of your network servers:

1.Enter configuration mode with the network option. copy tftp running-config

2.At the system prompt, select a network or host configuration file. The network configuration file contains commands that apply to all network servers and terminal servers on the network. The host configuration file contains commands that apply to one network server in particular.

{host network}

3.At the system prompt, enter the optional IP address of the remote host from which you are retrieving the configuration file.

ip-address

4.At the system prompt, enter the name of the configuration file or accept the default name.

filename

5.Confirm the configuration filename that the system supplies. y

Page 7-14	August 1997
	2524UM