AIS AI2524 user manual Configure terminal command with, Rom

AI2524 Router Card User’s Manual

2.Copy the system image from Flash memory to a TFTP server. copy flash tftp

3.When prompted, enter the IP address or domain name of the TFTP server.

{ip-address name}

4.When prompted, enter the filename of the system image in Flash memory.

filename

This example uses the show flash all command to learn the name of the system image file and the copy flash tftp command to copy the system image to a TFTP server. The name of the system image file (xk09140z) is listed near the end of the show flash all output.

Router# show flash all

2048K bytes of flash memory on embedded flash (in XX).

ROM	socket	code	bytes	name
0	U42	89BD	0x40000	INTEL 28F020
1	U44	89BD	0x40000	INTEL 28F020
2	U46	89BD	0x40000	INTEL 28F020
3	U48	89BD	0x40000	INTEL 28F020
4	U41	89BD	0x40000	INTEL 28F020
5	U43	89BD	0x40000	INTEL 28F020
6	U45	89BD	0x40000	INTEL 28F020
7	U47	89BD	0x40000	INTEL 28F020
security jumper(12V) is installed,
flash memory is programmable.
file	offset	length	name
0	0x40	1204637	xk09140z

[903848/2097152 bytes free]

Router# copy flash tftp

IP address of remote host [255.255.255.255]? 101.2.13.110 filename to write on tftp host? xk09140z

writing xk09140z !!!!...

successful tftp write. Router#

The exclamation point (!) indicates that the copy process is taking place. Each exclamation point !) indicates that ten packets have been transferred successfully. To stop the copy process, press <Ctrl-^>.

Once you have configured Flash memory, you might want to configure

the system (using th	configure terminal command) with the
Page 7-22	August 1997
	2524UM