AIS AI2524 user manual Privileged Exec Mode Commands, Bug

Chapter 4: Understanding the User Interface

Router> ?
Exec commands:
<1-99>	Session number to resume
connect	Open a terminal connection
disconnect	Disconnect an existing telnet session
enable	Turn on privileged commands
exit	Exit from the EXEC
help	Description of the interactive help system
lat	Open a lat connection
lock	Lock the terminal
login	Log in as a particular use
logout	Exit from the EXEC
menu	Start a menu-based user interfac
mbranch	Trace multicast route for branch of tree
mrbranch	Trace reverse multicast route to branch of tree
mtrace	Trace multicast route to group
name-connection	Name an existing telnet connection
pad	Open a X.29 PAD connection
ping	Send echo messages
resume	Resume an active telnet connection
show	Show running system information
systat	Display information about terminal lines
telnet	Open a telnet connection
terminal	Set terminal line parameters
tn3270	Open a tn3270 connection
trace	Trace route to destination
where	List active telnet connections
x3	Set X.3 parameters on PAD
xremote	Enter XRemote mode

	Privileged EXEC Mode Commands
	Because many of the privileged commands set operating parameters,
	privileged access should be password protected to prevent unautho-
	rized use.
	If the system administrator has set a password, you are prompted to
	enter it before being allowed access to privileged EXEC mode. Th
	password is not displayed on the screen and is case sensitive. If a pass-
	word has not been set, privilege EXEC mode can be accessed only
	from the router console. The system administrator uses the enable
	password global configuration command to set the password that
	restricts access to privileged EXEC mode.
	The privileged command set includes those commands contained in
	user EXEC mode, as well as the configure command through
	which you can access the remaining command modes. Privileged
	EXEC mode also includes high-level testing commands, such as de-
	bug.
August 1997	Page 4-7
2524UM