Chapter 1: Introduction
August 1997 Page 1-7
2524UM
Labels Labels are used in diagrams to designat
physical components such as jumper s traps,
switches, and cable connectors. For exam-
ple:
COM1
BOOT1
If the physical component being described is
part of the text, it appears as regular type:
To reset the COM1 port connector, press th
BOOT switch.
Menu | Submenu Menu selections are shown in bold text. The
bar separates the main menu from submenus.
For example:
File | Exit
indicates that you should selec t the File
menu, and then select the Exit menu item.
Screen output Screen shots, system prompts, and error
messages displayed on the screen are shown
in this style:
+CONFIG PORT,LPORT=40,HPORT=47,BITS=8
+CONFIG PORT,LPORT=48,HPORT=49,BITS=7
+CONFIG PORT,LPORT=50,BITS=8$0778
Warning: Warning messages indicate critical informa-
tion required for your safety or for correct
system operation. For example:
Warning: Failure to heed this im port ant
text could cause damage or unre-
liable results.