AIS AI2524 user manual Enter the name of the file you want to copy

AI2524 Router Card User’s Manual

The system tries to bring up at least the boot ROM image if it cannot boot an image from Flash memory. Before reinitiating the copy tftp flash command, you must set the configuration register boot field to a nonzero value, using th config-registerglobal con- figuration command.

The copy tftp flash command initiates a series of prompts to which you must provide responses. This example illustrates this dia log:

Router# copy tftp flash

*********************** NOTICE **************************

Flash load helper v1.0

This process will accept the TFTP copy options and then terminate the current system image to use the ROM based image for the copy. Router functionality will not be available during that time. If you are logged in via telnet, this connection will terminate. Users with console access can see the results of the copy operation. **********************************************************

If terminals other than the one on which this command is executed are active, this message appears:

There are active users logged into the system.

Proceed? [confirm] y
System flash directory:
File	Length	Name/status
1	2251320	abc/igs-kf.914

[2251384 bytes used, 1942920 available, 4194304 total]

Enter the IP address or the name of the remote host you are copying from:

Address or name of remote host [255.255.255.255]? 131.108.1.111

Enter the name of the file you want to copy:

Source file name? abc/igs-kf.914

Page 7-32	August 1997
	2524UM