AIS AI2524 user manual Manually Boot from a Network File

AI2524 Router Card User’s Manual

In this example, a router is manually booted from Flash memory. Be- cause the optional filename argument is absent, the first file in Flash memory is loaded.

> boot flash

F3: 1858656+45204+166896 at 0x1000

Booting gs7-k from flash memory RRRRRRRRRRRRRRRRRR RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR

RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR[OK - 1903912/13765276 bytes]

F3: 1858676+45204+166896 at 0x1000

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted

In this example, the boot flash command is used with the filename gs7- k; the name of the file that is loaded:

> boot flash gs7-k

F3: 1858656+45204+166896 at 0x1000

Booting gs7-k from flash memory

RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR

RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR[OK - 1903912/13765276 bytes]

F3: 1858676+45204+166896 at 0x1000

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted System Bootstrap, Version 4.6(1012) [mlw 99], INTERIM SOFTWARE Copyright (c) 1986- 1992 by cisco Systems RP1 processor with 16384 Kbytes of memory

Manually Boot from a Network File

To manually boot from a network file, complete these tasks in EXEC mode:

1.Restart the router reload

2.Press <Break> during the first 60 seconds of system startup.

Page 7-36	August 1997
	2524UM