AI2524 Router Card User’s Manual

Note:

Verify that the existing and new routers and/or access

 

servers are connected before entering th copy

 

running-config startup-config EXEC

 

command to save configuration changes. Use the ping

 

EXEC command to verify connectivity. If an incorrect

 

configuration file is downloaded, the new router will load

 

NVRAM configuration information before it can enter

 

AutoInstall mode.

If the configuration file is a minimal configuration file, the new router comes up, but with only one interface operational. Complete the fol- lowing steps to connect to the new router and configure it:

1.Establish a Telnet connection to the existing router. telnet existing

2.From the existing router, establish a Telnet connection to the new router.

telnet newrouter

3.Enter privileged EXEC mode. enable password

4.Enter setup mode to configure the new router. setup

Page 5-18

August 1997

 

2524UM

Page 84
Image 84
AIS AI2524 Verify that the existing and new routers and/or access, Servers are connected before entering th copy