AIS AI2524 user manual August

AI2524 Router Card User’s Manual

Edit Command Lines that Wrap

The Cisco IOS software assumes that you have a terminal screen that is 80 characters wide. If your terminal displays a different number of characters on each line, use the terminal width command.

When the cursor reaches the right margin, the command line shifts 10 spaces to the left. You cannot see the first ten characters of the line, but you can scroll back and check the syntax at the beginning of the com- mand. To scroll back, press <Ctrl-B> or the left arrow key repeatedly until you scroll back to the beginning of the command entry, or press <Ctrl-A> to return directly to the beginning of the line.

In this example, the access-listcommand entry extends beyond one line. When the cursor first reaches the end of the line, the line is shifted 10 spaces to the left and is redisplayed. The dollar sign ($) in dicates that the line has been scrolled to the left. Each time the cursor reaches the end of the line, the line is again shifted 10 spaces to the left.

Router(config)# access-list 101 permit tcp 131.108.2.5 255.255.255.0 131.108 Router(config)# $ 101 permit tcp 131.108.2.5 255.255.255.0 131.108.1.20 255.2 Router(config)# $t tcp 131.108.2.5 255.255.255.0 131.108.1.20 255.255.255.0 Router(config)# $108.2.5 255.255.255.0 131.108.1.20 255.255.255.0 eq 45

When you have completed the entry, press <Ctrl-A> to check the com- plete syntax before pressing <Enter> to execute the command. The dollar sign ($) appears at the end of the line to indicate that the line has been scrolled to the right:

Router(config)# access-list 101 permit tcp 131.108.2.5 255.255.255.0 131.108$

Page 4-26	August 1997
	2524UM