AIS AI2524 user manual TOC-5

AI2524 Router Card User’s Manual

Example: Dynamic Routing in Overlapping Areas	9-13
Example: Dynamic Interdoma inRouting	9-15
Configure ISO IGRP Parameters	9-17
Configure IS-IS Dynamic Routing	9-19
Enable IS-IS	9-19
Examples: IS-IS Routing Configuration	9-20
Assign Multiple Area Addresses to IS-IS Areas	9-23
Examples: NETs Configuration	9-24
Example: Router in Two Areas	9-25
Configure IS-IS Parameters	9-27
Configure IS-IS Interface Parameters	9-30
Configure CLNS Static Routing	9-33
Enable Static Routes	9-33
Examples: Basic Static Routing	9-34
Example: Static Intradoma inRouting	9-36
Example: Static Interdoma inRouting	9-38
Configure Variations of the Static Route	9-41
Map NSAP Addresses to Media Addresses	9-41
Configure Miscellaneous Features	9-43
Specify Shortcut NSAP Addresses	9-43
Use the IP Domain Name System to Discover ISO CLNS Addresses	9-44
Create Packet-Forwarding Filters and Establish Adjacencies	9-44
Examples: CLNS Filter	9-45
Redistribute Routing Information	9-45
Examples: Route Map	9-48
Specify Preferred Routes	9-49
Configure ES-IS Hello Packet Parameters	9-49
Configure CLNS over WANs	9-51
Example: ISO CLNS over X.25	9-51
Enhance ISO CLNS Performance	9-53
Specify the MTU Size	9-54
Disable Checksums	9-54
Disable Fast Switching Through the Cache	9-54
Set the Congestion Threshold	9-55
Transmit Error Protocol Data Units (ERPDUs)	9-55
Control Redirect Protocol Data Units (RDPDUs)	9-55
Configure Parameters for Locally Sourced Packets	9-56
Example: Performance Parameter	9-56
Monitor and Maintain the ISO CLNS Network	9-57
Configure TARP on ISO CLNS	9-59
TARP Configuration Task List	9-60
Enable TARP and Configure a TARP TID	9-60
Disable TARP Caching	9-61
Disable TARP PDU Origination and Propagation	9-61
Configure Multiple NSAP Addresses	9-61
Configure Static TARP Adjacency and Blacklist Adjacency	9-61
Determine TIDs and NSAPs	9-62
Configure TARP Timers	9-63
August 1997	TOC-5
2524UM