Chapter 13: AI2524 Frame Relay Configuration Steps

3.Enable Frame Relay encapsulation on the interface. encapsulation frame-relay

4.Assign a map group to the interface. map-groupgroup-name

5.Enable Frame Relay SVC support on the interface. frame-relay svc

Map-group details are specified with the map-listcommand.

Example: SVCs on an Interface

This example configures a physical interface, applies a map-group to the physical interface, and then defines the map-group.

interface serial 0 ip address 172.10.8.6 encapsulation frame-relay map-group bermuda

frame-relay lmi-type q933a frame-relay svc

map-list bermuda source-addr E164 123456 dest-addr E164 654321 ip 131.108.177.100 class hawaii

appletalk 1000.2 class rainbow

map-class frame-relay rainbow frame-relay idle-timer 60

map-class frame-relay hawaii frame-relay cir in 64000 frame-relay cir out 64000

Configure SVCs on a Subinterface (optional)

To configure Frame Relay SVCs on a subinterface, perform all th tasks in the previous section, except assigning a map group. Then, be- ginning in global configuration mode, complete these tasks:

1.Specify a subinterface of the main interface configured for SVC operation.

interface serial number.subinterface- number {multipoint point-to-point}

August 1997

Page 13-9

2524UM

 

Page 325
Image 325
AIS AI2524 user manual Example SVCs on an Interface, Configure SVCs on a Subinterface optional