AIS AI2524 user manual Terminal no edit, Revert to the editing mode of previous, Ing, Releases

Chapter 4: Understanding the User Interface

Editing Commands	Command Format
(Contd.)
Recall the next buffer entry. The	Press <Esc-Y>
buffer contains only the last 10 items
you have deleted or cut. If you press
<Esc-Y> more than 10 times, you will
cycle back to the first buffer entry.
Erase the character to the left of the	Press <Delete> or <Back-
cursor.	space>
Delete the character at the cursor.	Press <Ctrl-D>
Delete all characters from the cursor	Press <Ctrl-K>
to the end of the command line.
Delete all characters from the cursor	Press <Ctrl-U> or
to the beginning of the command line.	<Ctrl-X>
Delete the word to the left of the cur-	Press <Ctrl-W>
sor.
Scroll down one line.	Press <Enter>
Scroll down one screen.	Press the <Space> bar
Redisplay the current command line.	Press <Ctrl-L> or
	<Ctrl-R>
Transpose mistyped characters. The	Press <Ctrl-T>
character to the left of the cursor will
be transposed with the characte
located at the cursor.
Capitalize at the cursor.	Press <Esc>, then <C>
Change the word at the cursor to low	Press <Esc>, then <L>
ercase.
Capitalize letters from the cursor to	Press <Esc>, then <U>
the end of the word.
Insert a system code for this purpose.	Press <Ctrl-V> or
	<Esc-Q>
Disable enhanced editing mode and	terminal no edit-
revert to the editing mode of previous	ing
releases.

August 1997	Page 4-25
2524UM