AIS AI2524 user manual Command Mode Access Method Prompt Exit Method

Chapter 4: Understanding the User Interface

Command
Mode	Access Method	Prompt	Exit Method
User EXEC	Log in.	Router>	Use the logout command.
Privileged	From user EXEC mode,	Router#	To exit back to user EXEC
EXEC	type enable (requires a		mode, type disable. To enter
	password).		global configuration mode, use
			the configure privileged
			EXEC command.
ROM monitor	From privileged EXEC	>	To exit to user EXEC mode,
	mode, type reload. Press		type continue.
	<Break> during the first 60
	seconds while the system is
	booting.
Global configu-	From privileged EXEC	Router(config)#	To exit to privileged EXEC
ration	mode, type configure.		mode, type exit or end or
			press <Ctrl-Z>.
			To enter interface configuration
			mode, enter an interface config-
			uration command.
Interface config-	From global configuration	Router(config-if)#	To exit to global configuration
uration	mode, type interface		mode, type exit. To exit to
	type numbe .		privileged EXEC mode, type
			exit or press <Ctrl-Z>. To
			enter subinterface configuration
			mode, specify a subinterface
			with the interface com-
			mand.
Subinterface	From global configuration	Router(config-subif)#	To exit to global configuration
configuration	mode, type interface		mode, type exit. To enter priv-
	type number; encap-		ileged EXEC mode, type end or
	sulation frame-		press <Ctrl-Z>.
	relay; interface
	type number.sub-
	interface-numbe .
Router configu-	From global configuration	Router(config-router)#	To exit to global configuration
ration	mode, type router key-		mode, type exit. To exit to
	word.		privileged EXEC mode, type
			end or press <Ctrl-Z>.
IPX-router con-	From global configuration	Router(config-ipx-	To exit to global configuration
figuration	mode, type ipx rout-	router)#	mode, type exit. To exit to
	ing keyword.		privileged EXEC mode, type
			end or press <Ctrl-Z>.
Route-map con-	From global configuration	Router(config-route-	To exit to global configuration
figuration	mode, type route-map	map)#	mode, type exit. To exit to
	tag.		privileged EXEC mode, type
			end or press <Ctrl-Z>.
Key chain con-	From global configuration	Router(config-keychain)#	To exit to global configuration
figuration	mode type keychain		mode, type exit command. To
	name.		exit to privileged EXEC mode,
			type end or press <Ctrl-Z>.

August 1997	Page 4-5
2524UM