Cabletron Systems 42T, MICROMMAC-22T manual Unsaved Initialization Messages, 3. Alarm Messages Cont

		TROUBLESHOOTING
	Table 5-3. Alarm Messages (Cont.)
Displayed		Significance
Messages
Stack x Port xx		Indicates that a station has been removed from the
Removed		ring as a result of the beacon recovery process
Ring Port xx		Indicates a TPIM RI or RO has Autowrapped.
wrapped
Eagle		Indicates that the Eagle chip set is automatically
Reinserting		being reinserted.
Fault Recovery		Indicates that the network has been in and out of a
Oscillation		beaconing state several times.

5.2.3 Unsaved Initialization Messages

Unsaved intialization messages appear on the LCD as the event occurs, but are not saved in a buffer for future recall. Table 5-4 lists unsaved failure or error messages (If Failure or Error Messages appear, call your Cabletron Technical Support representative.), and Table 5-5 lists normal unsaved initialization messages.

Table 5-4. Unsaved Failure or Error Messages

Messages

• 82C54 Failure	• Eagle Failure
• NVRAM Failure	• LDRAM Failure
• Bit Swap Failure	• Modem SCC Error
• Console SCC Error	• SDRAM Failure
• Ctrl. Reg. Err.

5-5