Cabletron Systems MICROMMAC-22T, 42T manual Return key, Setting the REFRESH Field

LOCAL MANAGEMENT

2.Toggle to a screen mode selection, or press a for ADMINISTRATIVE, o for Operational, or r for RING OUT ENABLE, and then press the

Return key.

The selected screen mode appears.

Setting the REFRESH Field

1.Highlight the REFRESH3sec field.

2.Use the spacebar to toggle through time intervals, or use Shift and the + key to increment the time interval and Shift and the - key to decrease the time interval.

3.Press the Return key to save your changes.

Using the OPERATIONAL Mode Screen

The OPERATIONAL mode screen (Figure 4-10) is a display-only screen that shows the token ring access status of hub ports and devices. By default the OPERATIONAL mode screen shows the status of ports 1-12 for the MicroMMAC-T and attached STH hubs.

	uMMAC-T Local Management	Flash Image Version: 01.00.01
	CHASSIS STATUS VIEW (	OPERATIONAL )
	5	4	3	2		1
				STH24	MMAC24
				--->	<---
				16Mb/s	16Mb/s
			1	[BYP]	1	[INS]
			2	[BYP]	2	[INS]
			3	[ENB]	3	[INS]
			4	[LNK]	4	[INS]
			5	[LNK]	5	[INS]
			6	[LNK]	6	[ENB]
			7	[ENB]	7	[ENB]
			8	[ENB]	8	[ENB]
			9	[INS]	9	[ENB]
			10	[INS]	10	[ENB]
			11	[INS]	11	[ENB]
			12	[INS]	12	[ENB]
NEXT	[ OPERATIONAL		] [ REFRESH 3sec ]		RETURN

Figure 4-10. CHASSIS STATUS VIEW (OPERATIONAL) Screen

Station ports, on any module, can be in either of the following four operational states:

4-31