Table 9: Device Configuration - Status
MAC Address
IP Address
Product Model
Software Version
System Up Time
Registered
The device ID, in HEXADECIMAL format.
This field shows IP address of BT200
This field contains the product model information.
•Program: This is the main software (firmware) release number, always used to identify the software (firmware) system of the phone.
•Boot: Booting code version number
This field shows system up time since the last reboot.
Indicates whether accounts are registered to the related SIP server(s). BT200 can support four unique SIP profiles.
PPPoE Link Up
Indicates whether the PPPoE connection is enabled (connected to a modem).
Table 10: Device Configuration – Basic Settings
|
|
|
|
|
| End User |
| This contains the password to access the Web Configuration Menu. This field is | |
| Password |
| case sensitive with a maximum length of 25 characters. | |
|
|
|
|
|
|
|
|
|
|
| IP Address |
| There BT200 operates in two modes: |
|
|
|
| 1. DHCP mode: all the field values for the Static IP mode are not used (even |
|
|
|
| though they are still saved in the Flash memory.) The BT200 acquires its IP |
|
|
|
| address from the first DHCP server it discovers on its LAN. The DHCP |
|
|
|
| option is reserved for NAT router mode. To use the PPPoE feature, set the |
|
|
|
| PPPoE account settings. The BT200 establishes a PPPoE session if any of |
|
|
|
| the PPPoE fields are set. |
|
|
|
| 2. Static IP mode: configure all of the following fields: IP address, Subnet |
|
|
|
| Mask, Default Router IP address, DNS Server 1 (primary), DNS Server 2 |
|
|
|
| (secondary). These fields are set to zero by default. |
|
|
|
|
|
|
|
|
|
| |
| Time Zone |
| This parameter controls the date/time display according to the specified time zone. |
|
|
|
|
|
|
Grandstream Networks, Inc. | BT200 User Manual | Page 22 of 33 |
| Firmware 1.1.5.15 | Last Updated: 01/2008 |
