transfer operation and hand up, if the call is not answered, pressing “FLASH” button to resume the original call.
NOTE:
•When Attended Transfer failed, if A hangs up, the BudgeTone phone will ring user A back again to remind A that B is still on the call. A can pick up the phone to restore conversation with B.
Conference Call
BT200 phone supports
Assuming that call party A and B are in conversation. A wants to bring C in a conference:
1.A presses the “CONFERENCE” button to get a dial tone and put B on hold
2.A dials C’s number then “SEND” key to make the call
3.If C answers the call, then A presses “CONFERENCE” button to bring B, C in the conference.
4.If C does not answer the call, A can press FLASH back to talk to B.
NOTE:
•During the conference, if B or C drops the call, the remaining two parties can still talk. However, if A the conference initiator hangs up, all calls will be terminated.
Checking Message and Message Waiting Indication
When
The MWI (Message Waiting Indicator) LED will flash in red color in three quarters of a second when voicemail server sends message waiting information to
Mute and Delete
When in conversation with an ACTIVE LINE, pressing “MUTE/DEL” will mute the conversation, that is, you can hear the other party but the other party cannot hear you. Pressing the button again will resume the conversation.
When dialing a number, press “MUTE/DEL” will delete the last entered digit.
When receiving incoming call, press “MUTE/DEL” will Reject the call and forward to voice mail.
CALL FEATURES
BT200 series phone supports a list of call features: Caller ID Block (or Anonymous Call), Disable/Enable Call Waiting, Call Forward on Busy, Delay, or Unconditional, etc.
Following table shows the call features of
Table 7: BT200 Call Features
Grandstream Networks, Inc. | BT200 User Manual | Page 17 of 33 |
| Firmware 1.1.5.15 | Last Updated: 01/2008 |
