![](/images/new-backgrounds/1236464/23646437x1.webp)
Configuration Guide
The BT200 can be configured in two ways. Firstly, using the Key Pad Configuration Menu on the phone; secondly, through embedded
CONFIGURATION VIA KEYPAD
The BT200 keypad is the same as a traditional phone, with additional feature functionality including speaker, menu keys, LCD navigation keys, and advanced feature keys which include hold, transfer, conference and flash.
1.Be sure the phone is idle.
2.Press the MENU button to enter the keypad MENU to configure the phone.
Using the Keypad
1.To enter the MENU, press MENU button.
2.Navigate the menu by using the UP/DOWN
3.Press the MENU button to confirm a menu selection.
4.To delete an entry by pressing the MUTE/DEL button.
Press the MENU button to enter the key the Key Pad Menu. The menu options available are listed in table 8.
Table 8: Key Pad Configuration Menu
Manual Option Call Features
1Display “[1] dhcP On ” or “[1] dhcP oFF” for the current selection Press MENU key to enter edit mode
2Display “[2] IP Addr ”
Press MENU to display the current IP address Enter new IP address if DHCP is OFF
3Display “[3] SubNet ”
Press MENU to display the Subnet mask Enter new Subnet mask if DHCP is OFF
4Display “[4] routEr ”
Press MENU to display the Router/Gateway address Enter new Router/Gateway address if DHCP is OFF
5Display “[5] dnS ”
Press MENU to display the DNS address Enter new DNS address if DHCP is OFF
6Display “[6] tFtP ”
Press MENU to display the TFTP address Enter new TFTP server IP address
7Display “[7]
Press MENU to select new codec
Press ‘↓’ or ’↑’ to browse a list of available codecs
8Display “[8] codE rEL”
Press Menu to display the code releases Press ‘↓’ or ’↑’ to browse
9Display “[9] Phy Addr”
Press MENU to display the physical / MAC address.
10Display “[10] ring 0”
Grandstream Networks, Inc. | BT200 User Manual | Page 19 of 33 |
| Firmware 1.1.5.15 | Last Updated: 01/2008 |