Advanced Functionality | Custom |
| |
| mountable, AES encryption. |
Table 3: Hardware Specifications
LAN Interface (Ethernet ports) | Two (2) 10/100 Mbps Full/Half Duplex Ethernet Switch with LAN and |
| PC port with auto detection |
Headset Jack | 2.5mm Headset port |
LED | 1 LED in RED color |
Phone Case | |
| |
Universal Switching | Input: |
Power Adaptor | Output: +5VDC, 1200mA, UL certified |
Dimension | 220mm(l) x 180mm(w) x 65mm(h) |
Weight | 0.9kg (21bs) |
Temperature | 32 |
Humidity | 10% – 90% |
Compliance | FCC / CE / |
Table 4: BT200 Technical Specifications
Protocol | Support SIP 2.0, TCP/UDP/IP, PPPoE, RTP/RTCP/SRTP, HTTP, ARP/RARP, |
Support | ICMP, DNS, DHCP, NTP/SNTP, TFTP. |
Device | |
Management | including behind firewall/NAT |
| Auto/manual provisioning system, GUI Interface |
| Support Layer 2 (802.1Q, VLAN, 802.1p) and Layer 3 QoS (ToS, DiffServ, MPLS) |
Audio Features | |
| Advanced Digital Signal Processing (DSP) |
| Dynamic negotiation of codec and voice payload length |
| Support for G.723,1 (5.3/6.3K), G.729A/B, G.711 |
| band), GSM and iLBC codecs |
|
Telephony Features
Network and Provisioning
Silence Suppression, VAD (voice activity detection), CNG (comfort noise generation), ANG (automatic gain control)
Acoustic Echo Cancellation (AEC) with Acoustic Gain Control (AGC) for speakerphone mode, Support side tone
Adaptive jitter buffer control
Voice mail indicator, downloadable custom
Via keypad/LCD, Web browser, or secure (AES encrypted) central configuration file, manual or dynamic host configuration protocol (DHCP) network setup
Grandstream Networks, Inc. | BT200 User Manual | Page 8 of 33 |
| Firmware 1.1.5.15 | Last Updated: 01/2008 |