Wilton 7015 manual Introduction, Specifications

Familiarize yourself with the following safety notices used in this manual:

This means that if precautions are not heeded, it may result in minor injury and/or possible machine damage.

This means that if precautions are not heeded, it may result in serious injury or possibly even death.

Introduction

The Wilton Model 7015 Horizontal Cut-off Bandsaw is designed for high production cut-off work. Four cutting speeds and a hydraulic feed control allow the efficient cutting of virtually any material.

The Model 7015 Horizontal Cut-off Bandsaw is equipped with a coolant system that can greatly extend blade life and speed the cutting of a variety of materials that are best cut with cutting fluids and coolants.

Specifications

Model Number	7015
Capacity
Rectangular Stock	8 x 12.9 Inches
Round Stock	8.9 Inches
Flat Stock	8 x 10 Inches
At 45 Degrees	8 x 8 Inches
Speeds	82, 132, 170, 235 FPM
Motor	1 1/2 Horsepower, Capacitor Start, 1725 RPM, 1 Phase, 115 /220V
Blade Size	1 x 0.035 x 114.5" inches
Blade Guides	Tungsten carbide tip & ball bearing, eccentric shaft
Material	Tungsten carbide inserts
Sides	Eccentric shaft, ball bearings
Blade Wheel	12 inches diameter, cast iron
Dimensions (LWH)
Length	62.5 inches
Width	22.4 inches
Height	48.4 inches (cutoff position)
Weight	Approximately 551 pounds
Vise	Rapid acting, screw tightening vise
Coolant Pump	1/8 Horsepower, 1Phase 115/220V

6