Table of Contents

Table of Contents
Warranty and Service	2
Table of Contents	3
Warnings	4
Introduction	6
Specifications	6
Machine Features	7
Unpacking and Assembly	8
Electrical Connection	8
Controls and Indicators	9
Blade Selection	10
Operations	10
Adjustments	14
Maintenance	18
Cleaning	20
Lubrication	20
Coolant	20
Troubleshooting	21
Parts	23
Saw Stand and Bed	23
Saw Stand and Bed – Parts Breakdown	25
Saw Head	26
Saw Head – Parts Breakdown	29
Electric Assembly -- Parts and Breakdown	30
Wiring Diagram	31
Ordering Replacement Parts	32

The specifications in this manual are given as general information and are not binding. WMH Tool Group reserves the right to effect, at any time and without prior notice, changes or alterations to parts, fittings, and accessory equipment deemed necessary for any reason whatsoever.

Page 3

Image 3

Contents

Part No. M-7015 X 13-in Horizontal Cut-Off Bandsaw Warranty Warranty and Service Table of Contents Page Page Introduction Specifications Machine Features Machine BaseSaw Head Work Stop Unpacking and AssemblyMachine Setup Electrical Connection Blade Speeds Controls and Indicators Hydraulic Feed Control Blade Break-in ProceduresBlade Selection Operations Evaluating Cutting Efficiency Work SetupSetting The Vise For Angle Cuts Setting the Vise for Square Cuts Saw will automatically shut off at the end of the cut Starting the Saw Coolant Flow and Nozzle Position Setting the Work Stop Adjustments Blade Tracking AdjustmentKeep fingers clear of the blade and wheel to avoid injury Left Blade Guide Blade Guide Adjustment Drive Belt Tension Adjustment Blade Guide Bearing Adjustment Counterbalance Spring Tension Verifying Adjustment AccuracySwitch Adjustment Disconnect the cut-off saw from its electrical power source Changing Blades Maintenance Replacing the Drive Motor Changing the Drive Belt Cleaning LubricationCoolant Troubleshooting Fault Excessive blade breakageBad cuts crooked Probable Cause Suggested remedy Unusual wear on Fault Probable Cause Suggested remedyBad cuts rough Blade is twisting Parts Saw Stand and BedIndex No. Part No Description Size Qty TS-1490031 Saw Stand and Bed Parts Breakdown 7015-200 7015-314-1 Index No Description Size Qty Saw Head Parts Breakdown SDE MA-15 Electric Assembly Parts and Breakdown Wiring Diagram WMH Tool Group Ordering Replacement Parts

Wilton 7015 manual Table of Contents

Models: 7015