
Q
B – Command Line Interface Show Config Command
FallingTrigger | 0 |
SampleWindow | 10 |
ISLMonitoringEnabled | True |
RisingTrigger | 2 |
FallingTrigger | 0 |
SampleWindow | 10 |
LoginMonitoringEnabled | True |
RisingTrigger | 5 |
FallingTrigger | 1 |
SampleWindow | 10 |
LogoutMonitoringEnabled | True |
RisingTrigger | 5 |
FallingTrigger | 1 |
SampleWindow | 10 |
LOSMonitoringEnabled | True |
RisingTrigger | 100 |
FallingTrigger | 5 |
SampleWindow | 10 |
The following is an example of the Show Config Zoning command:
SANbox2 #> show config zoning
Configuration Name: default
Zoning Configuration Information
AutoSaveTrue
DefaultAll