Cisco Systems 12810, 12010, 12410 manual Milo# show startup-config

Chapter 4 System Startup and Basic System Configuration

Recovering a Lost Password

Step 7 Enter the enable command and password (if prompted).

Milo> enable

Password: <password>

Milo#

Step 8 Enter the show startup-configcommand to display the enabled password in the configuration file.

Milo# show startup-config

.

.

.

password bambam

Step 9 Enter the configure terminal command to enter global configuration mode:

Milo# configure terminal

Enter configuration commands, one per line. End with CTRL-Z.

Milo(config)#

Step 10 Enter the config-register 0xvalue command to change the software configuration register value back to its original value which you noted in Step 1.

Milo(config)# config-register 0xvalue

Milo(config)#

Step 11 Press Ctrl-Zto exit global configuration mode.

Milo(config)# Ctrl-Z

Milo#

Step 12 Reboot the router and use the recovered password with the enable command to gain access to the router.

	Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
OL-11496-01		4-43