
●To verify if the fan tray upgrade is installed on a Netra CT 900 server, log into the Shelf Manager and issue the following command for fan trays 1,2, and 3:
#clia fruinfo fan_tray 1 grep "Product Part"
If the “Product Part/Model Number” is
If the “Product Part/Model Number” is
2.2.2.2Installing Optional Components
Use the following table to locate your options and installation instructions.
DIMMs | “DIMM Requirements” on page |
| “Installing a DDR2 DIMM” on page |
Compact Flash card | “Installing the Optional Compact Flash Card” on page |
AMC | “Compact Flash Location” on page |
|
|
2.2.2.3Configuring the Advanced Rear Transition Module (ARTM)
If you are using one of the Netra advanced rear transition modules (ARTMs), refer to the documentation: Netra CP32x0 SAS Storage Advanced Rear Transition Module, Dual HD User’s Guide
See Section B.3, “Connectors and Pinouts” on page
Chapter 2 Hardware Installation and Service |