Miele KF 7540 SN Installation, Location, Ventilation, Fitting the handles, Climate range

Models: KF 7540 SN

1 48
Download 48 pages 46.8 Kb
Page 39
Image 39
Installation

Installation

Appliances without side wall heating must not be installed "side-by-side" next to another refrigerator or freezer.

Location

It should not be installed where it is exposed to direct sunlight or directly adjacent to a heat-producing appliance such as an oven or a radiator. The appliance should be installed in a dry well ventilated room.

The room temperature should not go above or below the climate range for which the appliance is designed. The higher the ambient temperature of the room the more energy the appliance requires to operate.

Do not place any appliance which gives off heat, such as a toaster or microwave oven on top of this appliance, as this would increase the appliance's energy consumption.

Climate range

The appliance is designed for a use within certain climate ranges (ambient temperatures) and should not be used outside this range. The climate range of this appliance is stated on the data plate inside the appliance.

Klimaklasse

Raumtemperatur

SN

+10 °C bis +32 °C

N

+16 °C bis +32 °C

ST

+18 °C bis +38 °C

T

+18 °C bis +43 °C

 

 

Operating in a room which is too cold will cause the cooling system to switch off for too long causing the internal temperature in the appliance to rise with the risk of food deteriorating and going off.

Ventilation

Air at the rear of the appliance gets warm. To ensure sufficient ventilation the ventilation gaps must not be covered over. The air inlet and outlet must not be covered or blocked in any way. They should be dusted on a regular basis.

Fitting the handles

If the door hinging does not require changing the handles should now be fitted to the appliance doors.

^Secure handle a to the holes in the door using the screws marked b.

39

Page 39
Image 39
Miele KF 7540 SN installation instructions Installation, Location, Ventilation, Fitting the handles, Climate range