The correct temperature
When pressing the buttons the following are shown in the display:
–When first pressed the last temperature selected flashes.
–Each subsequent press of the button adjusts the temperature shown in
1 °C steps.
–Keeping the button pressed in adjusts the temperature continually.
Approx. 5 seconds after letting go of the button the current actual temperature of the refrigerator or freezer section is automatically shown.
If you have adjusted the temperature, wait for approx. 6 hours if the appliance is not very full and for approx. 24 hours if the appliance is full before checking the temperature display as it will take this long for the display to show the accurate temperature in the appliance. If the temperature displayed is too low or too high, then adjust the temperature once more.
Temperature range
The temperature can be adjusted:
–in the refrigerator section from 4 °C to
9 °C
–in the freezer section from
-14 °C to
-28 °C
The ambient temperature of the room and installation location can affect the time it takes to reach the lowest temperature. If the ambient temperature is too high, then the appliance may not be able to reach the lowest temperature.
Setting the temperature in the Stayfresh (0 °C) zone
The temperature in the Stayfresh (0 °C) zone is automatically held at approx.
0 °C. It can be raised or lowered, e.g. if you want to use it for storing items like fish.
^Press the alarm button for approx. 7 seconds until a "b" shows in the
temperature display for the refrigerator section and a "0" shows in the temperature display for the freezer section.
To adjust the temperature use the buttons to the right of the freezer section temperature display.
Press the
Upper button: to raise the temperature (it gets warmer)
Lower button: to reduce the temperature (it gets colder)
15
