Switching on and off
Before using for the first time
^Clean the inside of the appliance and the accessories with warm water and a little washing up liquid, and then dry with a soft cloth.
Important:
To ensure correct functioning of the appliance, let it stand for between ½ and 1 hour after transporting it to its final location before connecting it to the mains. This is important for the correct functioning of the appliance.
Switching on
The refrigerator and freezer sections are switched on independently of one another so that, if required, you can switch on only one section.
Refrigerator section
Freezer section
^Press the
Bars appear in the temperature display for the freezer section and the alarm sounds. The freezer section starts cooling.
Allow the appliance to run for a few hours before placing food in it. This will ensure that the temperature is sufficiently low.
Switching off the alarm
^Press the alarm button.
^Press the
Bars will appear in the temperature display for the refrigerator section. The refrigerator section starts cooling. The interior light will come on when the door is opened.
The alarm stops. The bars will continue flashing in the temperature display until the temperature which has been set is reached.
Cool pack
Place the cool pack in the top drawer of the freezer section. The cool pack will be at its most effective after it has been in the freezer for approx. 24 hours.
12