The correct temperature
The temperature is adjustable in steps from
^Press the alarm button briefly.
The new temperature has now been stored in the appliance’s memory.
The appliance will automatically return to normal operation after approx. 5 minutes, if you do not press any buttons whilst in setting mode.
Temperature displays
During normal operation the temperature display on the control panel shows the temperature in the middle of the refrigerator section and the temperature in the warmest part of the freezer section.
If the temperature in the appliance is not within the range that the appliance is able to display (i.e. if it is not between 0 °C and 19 °C in the refrigerator section, and if the temperature in the freezer section is above 0 °C), then only a bar will light up in the temperature displays.
The temperature displays flash, if
–a different temperature is being set,
–the temperature in the appliance has risen by several degrees, indicating that the appliance is warming up too much.
This loss of coldness is no cause for concern in the following circumstances:
–when the door has been left open for a while, e.g. for removing or storing a large amount of food,
–when fresh food is being frozen.
However, if the temperature remains above
Temperature display brightness
The appliance is supplied with the brightness of the temperature display set as low as possible. However, if the door is opened, a setting changed or if the alarm is sounding, the temperature display will appear much brighter for approx. 1 minute.
The level of brightness can be adjusted to be:
–Brighter: by pressing the alarm button, and whilst holding it in press the upper button next to the temperature display for the freezer section.
–Dimmer: by pressing the alarm button, and whilst holding it in press the lower button next to the temperature display for the freezer section.
16
