Chapter 1 Overview 1-3
■Dual USB 2.0/1.1 ports on front panel
■One 10/100/1000MHBASE-T management port on front panel, with second
management LAN sent to ARTM (fromBCM 5715C); these are not directly tied
into IPM controller.
■SATAto EIDE master to support one Compact Flash Type II socket up to 16 GB of
user Flash. Socket is only accessible when blade is removed from chassis
■Redundant BIOS, 8MB
■Management support using on-board IPM controller (Renesas H8) that provides
dual IPMB bus. The IPMB bus is to be monitored by the shelf manager,providing
redundant IPMI channels
■Rear I/O expansion/connectivity provided to an optional ARTM. Compatible
with Sun’s currentARTM architecture with upgrade capability to support PICMG
working group ARTM.0standard (Zone 3 Interface)
■SAS connectivity from ARTM to AMC slot
■Contains TPM (TrustedPlatform module) chip
■225W delivered max power for the complete card (including 25W ARTM)via
dual, redundant -48 VDC nominal rails
■Certified NEBS compliant in Sun’s Netra CT 900 system