1-2 Sun Netra CP3250 Blade Server User’s Guide • April 2009
1.1 Overview
The Sun Netra CP3250 blade server is a dual-socket quad-core Intel-based ATCA
blade for high performance ATCAx86 applications in wireless infrastructure and
central office consolidation.
This blade server complies with the AdvancedTCA specification and is a new
addition to SUN's ATCAproduct family.
The ATCAstandard comprises the PICMG 3.0, 3.1, 3.2, and 3.3 versions of the
standard. The Sun Netra CP3250 blade server complies with the following
specifications:
PICMG 3.0, the base specificationthat defines the mechanical, power distribution,
system management, data transport, and regulatory guidelines.
PICMG 3.1, which builds on the PICMG 3.0 base specification and on IEEE
802.3-2003.
1.2 Features
The blade server’s primary features are as follows:
ATCAcard 322.25 mm x280 mm, 1.2 inch slot height
TwoHarpertown Processor Sockets, QuadCore version @2.135 GHz and up to
40W per CPU
Intel San Clemente North Bridge and Intel ICH9R I/O controller hub
DDR2 (registered, with ECC) at 667 MHz, up to six modules/cards, up to 4 GB
per DIMM, in very-low-profile design (0.72 inch height)
Two1000MBASE-T Ethernet base fabric (PICMG 3.0) interface ports (using
BCM5715C) from PCIe x4
Two10 Gb XAUI Ethernet extended fabric (PICMG 3.1) interface ports (using Sun
Neptune) from PCIe x8
One AMC.1 Type8S2E2 expansion slot (PCIe x8) supporting I/O expansion with
signaling to the advanced rear transition module (ARTM)
One Asynchronous serial port routed to front panel and ARTMfrom SuperIO