Chapter 4 System Startup and Basic System Configuration
Using RP Flash Memory Cards
Flash Memory Commands
This section describes console commands that you can use to access the different types of flash memories. Enter these commands from the privileged EXEC mode prompt.
pwd Command
To determine whether the present device you are accessing is the onboard flash SIMM on the RP or a PCMCIA flash memory card, use the pwd command.
This example shows how to access a flash memory card in slot 0 of the RP.
Milo# pwd slot0: Milo#
cd Command
To change access from one type of flash memory device to another, enter the cd
Where device-name can be slot0:, slot1:, or bootflash:.
The following example shows the cd command changing access to different devices.
Milo# cd slot1:
Milo# pwd slot1:/
Milo# cd slot0:
Milo# pwd slot0:/
Milo# cd bootflash:
Milo# pwd bootflash:/ Milo#
|
| Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide |
|
|
|
|
| ||
|
|
|
| |
|
|
|
