Cisco Systems 12810 manual Verifying Running Configuration File Settings, Milo# configure terminal

Chapter 4 System Startup and Basic System Configuration

Cisco IOS User Interface

Step 3 Enter the configure terminal command to enter global configuration mode.

Milo# configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Milo(config)#

Step 4 Enter the interface type slot/port command to enter interface configuration mode.

Milo(config)# interface type slot/port

Milo(config-if)#

Step 5 Enter the copy running-config startup-config command to save your configuration settings.

Milo# copy running-config startup-config

Your system is now minimally configured and able to boot using the configuration you entered.

Verifying Running Configuration File Settings

The show running-configcommand lets you check the settings in the running configuration file.

The following example displays the output for a Quad OC-3c/STM-1c POS interface installed in slot 1.

router# show running-config

Building configuration...

Current configuration:

!

version 12.0 no service pad

no service udp-small-servers no service tcp-small-servers

!

hostname Milo

!

enable secret 5 $1$W6K5$W/p5Bq6IPLGJ/hS9VVP1g. enable password twink

	interface POS1/0
	ip address 10.1.1.1 255.255.255.0
	crc 32
	Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
4-28	OL-11496-01