Q
B – Command Line Interface Image Command
Image Command
Manages and installs switch firmware.
Authority Admin
Syntax image cleanup
fetch [account_name] [ip_address] [file_source] [file_destination] list
unpack [file]
Keywords cleanup
Removes all firmware image files from the switch. All firmware image files are removed automatically each time the switch is reset.
fetch [account_name] [ip_address] [file_source] [file_destination] Retrieves image file given by [file_source] and stores it on the switch with the file name given by [file_destination]. The image file is retrieved from the device with the IP address given by [ip_address] and an account name given by [account_name]. If an account name needs a password to access the device, the system will prompt you for it.
list
Displays the list of image files that reside on the switch.
unpack [file]
Installs the firmware file given by [file]. After unpacking the file, a message appears confirming successful unpacking. The switch must be reset for the new firmware to take effect.
Notes To provide consistent performance throughout the fabric, ensure that all switches are running the same version of firmware.
