B – Command Line Interface Show Command
Q
switch
Displays switch operational information.
topology
Displays all connected devices.
users
Displays a list of
version
Displays an introductory set of information about operational attributes of the switch. This keyword is equivalent to the About keyword.
Examples The following is an example of the Show Chassis command:
SANbox2 #> show | chassis |
| |
Chassis | Information |
| |
| |||
BoardTemp | (1) | - Degrees Celsius | 32 |
BoardTemp | (2) | - Degrees Celsius | 36 |
FanStatus | (1) |
| Good |
FanStatus | (2) |
| Good |
PowerSupplyStatus (1) | Good | ||
PowerSupplyStatus (2) | Good | ||
The following is an example of the Show Domains command:
SANbox2 #> show domains
Principal switch is (local): 10:00:00:c0:dd:00:90:6b
Domain ID List:
Domain 22 (0x16) WWN = 10:00:00:c0:dd:00:90:6b
The following is an example of the Show Fabric command:
SANbox2 #> show fabric
Switch | ID | WWN | Eth0IPAddress | |
1 | (0x1) | fffc01 | 10:00:00:c0:dd:00:bd:ec | 10.20.68.107 |
4 | (0x4) | fffc04 | 10:00:00:c0:dd:00:80:21 | 10.20.68.14 |
