Q-Logic 59021-05 B manual Device Access

3 – Planning Device Access

Q

3.4

Device Access

Consider device access needs within the fabric. Access is controlled by the use of zones and zone sets. Some zoning strategies include the following:

„Separate devices that use different operating systems.

„Separate devices that have no need to communicate with other devices in the fabric or have classified data.

„Separate devices into department, administrative, or other functional group.

„Group TL_Port target devices with initiators to allow automatic discovery.

„Reserve a path and its bandwidth from one port to another.

A zone is a named group of devices that can communicate with each other. Membership in a zone can be defined by switch port number, port Fibre Channel address, or by device worldwide name (WWN). Devices can communicate only with devices that are members of the same zone. A zone can be a member of more than one zone set. Several zone sets can be defined for a fabric, but only one zone set can be active at one time. The active zone set determines the current fabric zoning.

A zoning database is maintained on each switch consisting of all inactive zone sets, the active zone set, all zones, aliases, and their membership. The SANbox2-16 switch supports the following maximum limits:

„256 zone sets

„256 zones per zone set

„1000 total zones

„2000 members per zone

„256 aliases

„2000 members per alias

„2000 total number of alias and zone members Three types of zones are supported:

„Soft zone

„Access Control List (ACL) - hard zone

„Virtual Private Fabric (VPF) - hard zone

3-8 59021-05 B