DESCRIPTION | DESCRIPTION | |
|
|
|
|
|
|
REAR PANEL | FRONT PANEL |
|
|
|
| LOW SHELF | HIGH SHELF | LEVEL |
| FREQ |
| LEVEL |
| FREQ |
|
| LEVEL |
| FREQ | |||||||||
| SERIAL NUMBER | WARNING DO NOT EXPOSE THIS |
| 30 50 | 100200 | 2 | 4 | 6 | 10 |
| 0 | 200 | 400 | 600 | WIDTH |
| 0 |
| 300 | 800 | 1.1k | WIDTH |
| 0 | 800 | 2.1k |
|
| 20 |
|
|
|
|
|
|
| 100 |
| 900 |
|
|
|
| 166 |
| 1.8k |
|
|
| 400 |
| ||
MADE IN USA |
| EQUIPMENT TO RAIN OR MOISTURE. |
| 1.5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
www.rolls.com |
| TO REDUCE THE RISK OF ELECTRIC | MADE IN USA |
| 400 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SHOCK DO NOT REMOVE BACK. |
|
|
|
|
|
| CLIP |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
ROLLS |
| www.rolls.com |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
CAUTION | NO USER SERVICABLE PARTS |
| 16 | HZ 500 | 1 |
| KHZ | 30 | dB +12 | 70 | HZ | 1.5k | 3 OCT.3 | dB | +15 | 150 | HZ | 3k | 3 OCT.3 | dB +15 | 300 | HZ | ||||
|
|
| ||||||||||||||||||||||||
+ | INSIDE. REFER SERVICING TO |
| ACTIVE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| QUALIFIED SERVICE PERSONNEL. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
- | RISK OF ELECTRIC SHOCK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
PS12 | DO NOT OPEN | RISQUE DE CHOC - NE PAS ENLEVER | BALLANCED |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OUTPUTS | INPUTS |
BALLANCED 1/4” | BALLANCED 1/4” |
OUTPUT: Balanced XLR and balanced 1/4” and RCA jacks for connection to a mixing board, power amplifier or recording device.
INPUT: Balanced XLR and balanced 1/4” and RCA jacks for connection to the output of a mixing board, instrument, or other device with the signal to be pro- cessed.
CONNECTION
Turn off all equipment before making any connections. Mount the RPQ160 in a properly grounded rack, and make sure the rack is properly ventilated. Ambient temperatures should not exceed 113 degrees F (45 degrees C) when the equip- ment is in use. Connect your RPQ160 using XLR, RCA or 1/4” connectors.
Connect the AC power cord to a properly grounded AC outlet. Route the AC power cord away from audio lines.
L | FREQ |
| WIDTH | LEVEL |
| FREQ | WIDTH | LEVEL |
| FREQ |
| WIDTH | LEVEL | PARAMETRIC |
300 | 800 | 1.1k | 0 | 800 | 2.1k 3.3k | 0 | 2k | 4k | 6k | 0 | ||||
166 |
| 1.8k |
|
| 400 | 7k |
|
| 900 |
| 12k |
|
| EQUALIZER |
+15 150 | HZ | 3k | 3 OCT.3 | 300 | HZ 10k | 3 OCT.3 | 600 | HZ | 20k | 3 OCT.3 | RPQ160b | |||
POWER |
LOW SHELF: High Pass Filter control; adjusts the amount of low frequency rolloff from 500 Hz down to 16Hz for the entire output of the RPQ160.
HIGH SHELF: Low Pass Filter control; adjusts the amount of high frequency rolloff from 1 kHz up to 20 kHz for the entire output of the RPQ160.
NOTE: THERE IS NO BYPASS SWITCH FOR THE LOW OR HIGH SHELF FILTERS - SIMPLY TURN THE LOW SHELF COMPLETELY COUNTERCLOCK- WISE, AND THE HIGH SHELF COMPLETELY CLOCKWISE TO BYPASS THESE CIRCUITS.
LEVEL: Adjusts the overall signal level of the RPQ160.
NOTE: The following three descriptions are identical for all four bands of equaliza- tion.
FREQUENCY: Selects the frequency to be boost or cut. The band frequency ranges are listed below:
Band 1: | 70 Hz to 1.5 kHz |
Band 2: | 150 Hz to 3 kHz |
Band 3: | 300 Hz to 10 kHz |
Band 4: | 600 Hz to 20 kHz |
WIDTH: (Q): Varies the shape or width of the equalization being boost or cut from
.3 to 3 octaves wide.
LEVEL: Boosts or cuts the signal of the indicated band from
Power Switch: Applies power to the RPQ160 when the unit is connected to a properly grounded ac outlet. The Power LED will light when the RPQ160 is on.